MI 3155 Euro set
Sets
- Instrument MI 3155 EurotestXD
- 8800 mAh battery pack (installed in tester)
- Power supply adapter 12V/3A
- Tip commander + 2 x bat. AAA
- Mains plug cable 1,5 m
- Test lead green 1,5 m
- Test lead, 4-wire, 1,5 m
- Test lead, 3-wire, 1,5 m
- Test lead, 2-wire, 2,5 kV, 1,5 m
- Test probe, 6 pcs (black, brown, blue, green-2, red)
- Crocodile clip, 7 pcs (black-2, brown, blue, green, red-2)
- Earth set, 3-wire 20 m
- USB cable
- Soft carrying bag
- Soft carrying neck belt
- Current clamp A 1018 (low range, leakage)
- Current clamp A 1019
- Metrel ES Manager PRO license*Short instruction manual
- Instruction manual (CD)
- Guide for testing and verification of Low voltage installations (CD)
- Calibration certificate
- Metrel ES Manager (program installation) A 1481 (CD)
- Metrel aMESM Android app
Do you own this product?
Optional accessories
A 1018 Current clamp (low range, leakage)
High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 1.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.
A 1110 Three phase adapter
3-phase test adapter for installation safety testing on 3-phase sockets type 16 A 3CEE.
A 1111 Three phase adapter with switch
3-phase adapter with selection switch for installation safety testing on 3-phase sockets type 16 A 3CEE. The adapter allows seamless switching between measurements.
S 2027 Earth test set, 3-wire, 50 m
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead, 4.5 m; test lead, 1 m, 2 pcs; earth spikes, 2 pcs; soft carrying bag.
A 1019 Current clamp
Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.
A 1172 Luxmeter sensor, type B (PS/2)
Luxmeter sensor, type B, for high-accuracy illuminance measurement e.g. for emergency lightning inspection.
A 1173 Luxmeter sensor, type C (PS/2)
Illuminance probe for light conditions measurements with 0,1Lux resolution.
P 1101 BASIC to PRO licence key upgrade for Metrel ES Manager
Licence key for upgrading the Metrel ES Manager to advanced version with professional report creation functionality.
A 1401 BLK Tip commander
Single phase, 3-wire tip commander with TEST, MEM and function selection buttons, RGB LED status indicator and front LED lamp.
A 1199 Ro-adapter
Ro-adapter is intended for performing earth resistance measurement in combination with installation safety tester.
A 1191 Receiver R10K
Receiver R10K is used for wire tracing, fuse identification and fault finding in low voltage electrical installations.
A 1202 Additional extension part for A 1201
Additional extension part for Insulated rod for CONTINUITY measurement A 1201.
A 1201 Insulated rod for CONTINUITY measurement
Insulated rod enables insulation resistance and continuity measurement on hard-to-reach objects, e.g. luminaries.
A 1193 Universal test cable 3 x 1,5m
3-wire test lead for measurements on single or three phase electrical installations.
A 1015 Test probe, blue
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1062 Test probe, green
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1014 Test probe, black
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1310 Crocodile clip, blue
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1309 Crocodile clip, green
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1013 Crocodile clip, black
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
S 2012 Continuity test lead, 10 m, 2 pcs (red, black)
2 pieces of extension test lead for continuity measurements.
A 1532 EVSE adapter
EVSE (Electric Vehicle Supply Equipment) adapter is a special accessory intended for testing Mode 3 EV supply equipment with a type 2 connector.
A 1016 Test probe, red
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1064 Crocodile clip, red
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1558 Test lead, 4 x 1.5 m
4-wire test lead for continuity and impedance measurements on electrical installations.
A 1055 Test lead, 2 x 1.5 m
2-wire test lead for continuity and insulation resistance measurements on electrical installations.
A 1551 Carrying bag (L)
mall carrying bag for transport and storage of test instrument and all belonging standard set and euro set accessories.
Technical data
- Dimensions: 200 x 460 x 245 mm
A 1552 Carrying bag (XL)
Large carrying bag for transport and storage of test instrument and all belonging standard set and euro set accessories.
Technical data
- Dimensions: 200 x 600 x 245 mm
A 1314 UK Plug Commander
Single phase, 3-pin plug commander with TEST, MEM and function selection buttons and RGB LED status indicator.
A 1652 Barcode scanner (Bluetooth)
Barcode scanner for identification of barcode labelled appliances.
P 1104 Metrel SDK (Licence)
SDK licence key for instrument integration with 3rd party SW. Please contact your local dealr for more information on how to order the licence key.
A 1736 Carrying case
Carrying case for MI 3155 EurotestXD together with the Euro set of accessories – for earth resistance testing with or without stakes, testing of impedances, insulation and safety devices in installations, functional tests like power and harmonics, and much more. Some extra space is left available for any additional equipment the user may want to bring along.
Technical data
- Dimensions: 590 x 470 x 270 mm
- Weight: 6.0 kg
A 1737 Carrying case
Case with foam inserts with slots for a Eurotest multifunctional electrical installation safety tester and MI 3309 BT DeltaGT. Multiple possible instrument & accessory combinations. We recommend the MI 3110 EurotestIT, MI 3309 DeltaPAT, MD 9231 AC/DC current clamp and A 1207 three phase adapter combination.
Technical data
- Dimensions: 590 x 470 x 270 mm
- Weight: 6.0 kg
A 1738 Carrying case
It can fit for a Eurotest multifunctional electrical installation safety tester and either an A 1532 EVSE adapter or A 1532 XA EVSE adapter. It has an additional large slot for the tester’s accessories or other equipment.
Technical data
- Dimensions: 590 x 470 x 270 mm
- Weight: 6.0 kg
S 2143 Set of test probes CAT II FI 2 black, blue, green METREL
Test probes with 2 mm diameter test tip to fit testing holes incorporated in the various connectors and to reach measurement locations unreachable by test probes with 4 mm diameter test tip.
Can be used together with
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
