MI 3136 Standardni set
Sets
- Instrument MI 3136 EurotestCOMBO XC
- 1x A 1014 Test probe, Black
- 1x A 1015 Test probe, Blue
- 1x A 1062 Test probe, Green
- 1x A 1013 Crocodile clip, Black
- 1x A 1310 Crocodile clip, Blue
- 1x A 1309 Crocodile clip, Green
- 1x A 1193 Test cable, BLK/GRN/BLU, 1.5m, 0.75mm2
- 1x A 1053 Test cable, 1.5m, 0.75mm2
- 1x A 1857 USB cable, Type C
- 1x A 1289 Soft padded carrying bag Size: M
- Calibration certificate
- Short instruction manual
- Instruction manual
- Metrel ES Manager BASIC Licence
- SW 1201 Metrel ES Manager (program installation)
Do you own this product?
Optional accessories
S 2027 Earth test set, 3-wire, 50 m
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead, 4.5 m; test lead, 1 m, 2 pcs; earth spikes, 2 pcs; soft carrying bag.
A 1401 BLK Tip commander
Single phase, 3-wire tip commander with TEST, MEM and function selection buttons, RGB LED status indicator and front LED lamp.
A 1191 Receiver R10K
Receiver R10K is used for wire tracing, fuse identification and fault finding in low voltage electrical installations.
S 2058 Insulation test plates
Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-4-1).
A 1289 Carrying bag (M)
Large soft carrying bag for transport and storage of test instrument and belonging accessories.Technical data
Technical data
- Dimensions: 170 x 250 x 240 mm
A 1193 Universal test cable 3 x 1,5m
3-wire test lead for measurements on single or three phase electrical installations.
A 1015 Test probe, blue
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1062 Test probe, green
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1014 Test probe, black
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1310 Crocodile clip, blue
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1309 Crocodile clip, green
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1013 Crocodile clip, black
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1314 UK Plug Commander
Single phase, 3-pin plug commander with TEST, MEM and function selection buttons and RGB LED status indicator.
A 1778 Test probe, Black - Magnet tip
The A 1778 magnetic probe (with a Ø6.6 mm right-angle magnetic adapter and a Ø4 mm socket) is designed for semi-temporary measurement of voltage on steel screw terminal blocks.
A 1854 Telescopic probe CAT IV 1000V, Lmax = 2.1m
High rigidity 2.1-meter long 1000 V CAT IV telescopic probe
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
